Official Stock Flash Firmware Now Available for the Tecno Spark 8P KG7 Flash File. This firmware can be used to solve any software issues in your Tecno Spark 8P KG7, such as hang-on logo, fastboot Mode, and FRP lock. It also allows you to display blank or white after flashing, uneventful recovery, dead after Flash, etc.
Download Tecno Spark 8P KG7 From Here. The given firmware file from Tecno was the first one and is contained in the scatter file. This file tells you how to flash it, and the driver installs it using this SP Flash program. Here’s how to Flash Tecno Phone with a Scatter file. The file is explained below in complete detail. How to Flash Manual.
Download Tecno Spark 8P KG7 Flash File
How to Flash Tecno Spark 8P KG7:
- First, Download Tecno Spark 8P KG7 and Install Mediatek Driver.
- Extract All File From Zip File.
- Navigate to your FlashTool folder and then run flashtool.exe.
- After opening the tool, click the Download Agent tab.
- Select and select the MTK_AllInOne_DA.bin document in the FlashTool folder.
- Then click on the option from the scatter-loading files tab and select the scatter file from the flash folder.
- Click on the download button.
- Please switch off the phone and connect it to the Flashtool.
- Based on the mood of the phone’s boot, Press the button to attach the cable to the phone.
- The green tick will be available when flashing has been completed.
NOTE: During flashing, don’t remove your data cord from the handset, or the phone will enter dead mode.
When your device is not working, the logo is not working, or the handset is unlocked, all problems are fixed at once following flashing this file. If FRP locks you, then flashing will allow you to open it.