Download Tecno Spark Go 2020 KE Flash File (official Firmware). The firmware file provided by Tecno, was the first file and is contained in the scatter file. It documents how you can flash the device and how to install the driver using SP Flash Tool. Here’s how to flash Tecno Mobile using a scatter file. The file is provided below in detail—the steps to Flash Manual.
About Tecno Spark Go 2020
Tecno Spark Go 2020 mobile was released on September 1, 2020. The device has a 6.52-inch touchscreen display with a resolution of 720×1600 pixels, and the aspect ratio is 19.5:9. Tecno Spark Go 2020 is powered by a 1.8GHz Quad-core MediaTek Helio processor. It is equipped with 2GB RAM. It is powered by 2GB of RAM. Tecno Spark Go 2020 runs Android 10 and is powered by a battery of 5000mAh.
Download Tecno Spark Go 2020 KE Flash File
Device Name: Tecno Spark Go 2020 KE
Type: Full ROM
ROM Size: up to 3.23 GB
Youtube Channel: Click Here
Firmware Version: All Version
| KE5-H6123D-RGo-INJO-LC-230111V434 |
| KE5-H6123D-RGo-INJO-LC-221108V429 |
| KE5-H6123ABC-QGo-GL-211014V426 |
| SP Flash Tool |
| Tecno Flash Tool |
| MTK Driver |
How to Flash Tecno Spark Go 2020 KE5:
Download MTK Driver.
1. Download the program and extract the SP Flash Tool.
2. Out of the icon that appears, Double click on Flash_tool.exe
3. It will start the program on your computer 3 Click on Scatter-Loading on the right part of the program.
4. Now, assign the firmware, which will be in the form “Android_scatter.txt”.
5. Click Download to begin flashing.
6. Turn off your Mobile and connect it to the PC by pressing Volume down or the Volume up key.
7. It’ll guide you to successful Flashing.
Read Also:
