Tecno Spark Go Flash File Firmware (Stock Rom)

Tecno Spark Go Flash File (Stock Rom) : Today in this post i will share you an installation process of installing latest original flash file of Tecno Spark go. Flash Files are an operating system of the smart phone which installed in smartphone ROM. They help to run our mobiles OS/UX/UI properly. Flash Files are also known as Stock Rom and Firmware. These firmware designed by the manufacturer of that smartphone. stock Rom help to remove all type of lock and fix the slow or lagging issue of the Tecno Spark Go mobile.

Tecno Spark Go Flash File
Tecno Spark Go Firmware Flash File (Stock Rom)

About Tecno Spark Go

Tecno Spark Go phone comes with a 6.52-inch touchscreen display with a resolution and aspect ratio of 720×1600 pixels and 20:9. The Tecno Spark Go powered by a quad-core MediaTek Helio A20 processor. It comes with 2GB of RAM and 32GB of inbuilt storage runs on Android 10.It is powered by a 5000mAh battery.Tecno Spark Go has dual 13MP rear AI camera and 8MP of front selfie camera.

Advantage Tecno Spark Go

  • Flash Stock ROM to Unbrick Your Device
  • Repair the problem with the device’s boot loop.
  • Upgrade or downgrade the stock software version.
  • It is easy to remove the device.
  • Firmware can fix software or lag issues with the your smartphone .
  • To regain your device warranty (if any), you can go back to Stock ROM.

Download Tecno Spark Go Firmware

You can download the firmware for your Tecno Spark Go smartphone from the given link below:

Name & Download Link
KC1-H6114A-P-190731V165
KC1-H6114A-P-191010V226
KC1-H6114A-P-191119V264
SP Flash Tool
MTK Driver
Tecno Flash Tool

Tecno Spark Go Flash File Firmware (STOCK ROM)

  • Extract downloaded Official Stock ROM.
  • Install Mediatek Vcom Driver on your computer.
  • Get & Extract SP Flash Tools Run SP Flashtool.exe
  • Go to Download Tab Click Scatter Load Scatter File ROM Folder
  • ChooseDownload only. Click Download Connect to Yourself Turned off the phone.
  • You can see flashing On Screen. After Complete unplug and Switch it On

How to Tecno Spark Go Pattern Unlock & FRP Remove :

  • Download all of the Documents in the above links if the link is not Functioning. Only leave your comment on below comment box
  • Install WinRAR software on your Pc or laptop to Get extract downloaded Hyperlinks
  • Extract all Document and Then paste into desktop
  • Initial Install libusb win32 devel filter 1.2.6.0 OR MediaTek USB Notebook and after that Reboot (Restart) Computer
  • Open MCT MediaTek USB Driver Tool Click BYPASS
  • Switch OFF Phone Press and Maintain Volume Up + Down and Add USB Cable
  • Wait Until Improving
  • When Done Disable Protection, You can Watch like Below Picture
  • Open SP flash Instrument Click Scatter-loading Select button and Choose MT6761_Android_scatter Document
  • Click Download-Agent and Select MTK_AllInOne_DA.
  • Go to Option â–º Connection and Set Com Port (COM:3) and Baud Rate (921600)
  • Now Open Device Manager and Check Your Phone Com Port (Check below Image for more Information)
  • Now go to Userdata Format Tab and click to Manual flash
  • Copy 0x116000000 code and paste to Begin Address[HEX]
  • Copy 0xc0000000 code and paste to Format Length[HEX]
  • FRP Unlock Code Manual Format Flash.
  • Copy 0x1888000 code and paste to Begin Address[HEX]
  • Copy 0x100000 code and paste to Format Length[HEX]
  • Click on the Start button
  • Wait Until Completed.

Read Also:

Tiwari Ji

Knowledge comes from everywhere don't keep it only for you share to all. Keep support us Thank you

Related Articles

3 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *