LYF Jio F211s Flash File (Firmware ROM)

LYF Jio F211s Flash File (Firmware ROM)

Are you using Lyf Jio F211s Latest Flash File Working 100% 2020 keypad mobile and now getting errors just like the auto reboot, white or blank display, unable to show ON or LYF Jio F211s is locked? If yes then you’ve got landed on the right place and today we’ll show you to the simplest way to flash LYF Jio F211s firmware. the better part of this method is that no got to use any premium or professional flash tool. Free SPDupgrade tool is enough to flash LYF Jio F211s flash files as an LYF Jio F211s flash tool.

Download the ROM which we’ve listed during this table below. you’ll also update your LYF Jio F211s smartphone anytime, also you’ll install the Stock Firmware build to revert back to the old version also. just in case if you’ve got bricked your device, then you’ll bring back the phone (Unbrick) using the stock firmware anytime. Also if you are feeling your LYF Jio F211s lag or has any issue, then flash the stock firmware from the list below and save from the situation. Stock Firmware doesn’t void a guaranty on your LYF Jio F211s.

Read Me: Lyf Jio F90M Latest Flash File Working 100% 2020

Download Lyf Jio F211s Flash File Tested 2020 (Hang On Logo)

Name: LYF-F211S-000-02-22-161019_officialroms.com.rar
Size: 179.9 MB
Link:

Click Here To Start Download

Download SPD Tool Latest Version

Name: upgradeSPDTool 4.00001 by officialroms.zip
Size: 2.2 MB
Password: officialroms
Link:

Click Here To Start Download

Download SPD Driver (Most Important)

Name: Spd Driver.zip
Size: 12.8 MB
Password: officialroms
Link:

Click Here To Start Download

How to Flash Lyf Jio F210q Flash File:

  • Download the LYF F90m Flash file which consists of File, Tool & Driver.
  • Install Driver
  • Connect Phone in off mode holding Center Key to cross-check driver installation. It will make port named “Qualcomm HS-USB 9008”
  • It means the driver has been installed successfully.
  • Install Flash Tool named Megafone SW Download Tool.
  • Click on Search File & assign the path of the flash file.
  • Out of four File appearing, select prog_emmc_firehose_8909_lite.
  • Connect Phone & press Center Key as Boot key & Click on Download.
  • The phone will switch to EDL mode directly and Upgrade starts.
  • Make sure no space is there in File Path.

If flashing fails or does not start, then there must be a gap between the words while choosing the flash file. Rename the folder. As in Qualcomm Flashing, there must be no gap in between the words. JIO new should be replaced by jio_new or joined.

Read Also:

LEAVE A REPLY

Please enter your comment!
Please enter your name here