LYF Jio F30c flash file Hang on logo Tested File 2020, firmware flash tool is here. Today we are going to share a full detail post to flash official stock ROM on Jio F30c mobile. Jio F30c was launched in 2019 but till now it’s most selling low budget keypad mobile for Jio users.
But problem is that there are so many software related issues on the device like Jio F30c stuck on Jio Logo, stuck in a boot loop, hanging issues, null IMEI problem and auto reboots issues, etc. So if you are one of them who are using Jio F30c mobile and getting any software related problem on the device then this post may help you to get a ride of these problems.
The best part of this tutorial is that no technical skill required to perform this task. Same as no need to go anywhere to repair your device. Everyone can do it in their own home. Here in this Jio F30c Firmware flashing guide, we will show you two different methods to flash Jio Lyf F30c mobile. You may use any method to install official stock ROM on the Jio flash file.
Download LYF Jio F30c Flash File Tested 2020 (Hang On Logo)
Size: 585.0 MB
Download QFST Tool Latest Version
Name: QPST_v2.7.104 by officialroms.zip
Size: 7.0 MB
How to Flash LYF Jio F30c:
- First Download LYF F30c Flash file
- Download QPST tool.
- Boot Key: Volume UP + Down
- Install Qualcomm driver.
- Run QPST tool.
- Add a new port. Connect the phone holding boot key. (Check device manager)
- Click browse & select the Stock ROM file.
- Select Download, and wait to complete the flashing.
If flashing fails or does not start, then when selecting a flash file there must be a gap between the words. Rename it to folder. There must be no gap between the words, as in Qualcomm Flashing.