Tecno Spark KE6J Da & Frp File Pattern Unlock SP Tool

Tecno Spark KE6J Da & Frp File Pattern Unlock SP Tool

Tecno KE6J Frp & Pattern Unlock DA File: Here share informative article for android phone associated which applications issues you can certainly solve employing this particular method for free some article necessary box and a few for free that you can fix such as applications associated, design lock, Tecno KE6j Frp File (Bypass google accounts ) for this one to demanded which below in mandatory connect together on YouTube station, Facebook webpage, Twitter, Google Plus societal accounts you receive notification of uploaded movie and article Tecno Spark 6 Air KE6 Da & Frp File SP Tool.

About Tecno KE6J

Tecno KE6j Pattern Unlock : Tecno Spark 6 Air smartphone has been started on 30th July 2020. The phone includes a 7.00-inch touchscreen display with a resolution of 720×1640 pixels and an aspect ratio of 20.5:9. Tecno Spark 6 Air is powered with a quad-core MediaTek Helio A22 (MT6761) chip ) It comes with 2GB of RAM. The Tecno Spark 6 Air runs Android 10 and can be powered with a 6000mAh battery.

Download Spark KE6J DA File & FRP File Unlock Pattern Also Using SP Tool

Name: Tecno Spark KE6J DA File & Scatter File by officialroms.com.zip
Size: 19 MB
Password: officialroms (Free)
Link:

MediaFire | AndroidFileHost

Name: SP Flash Tool V.1924 by officialroms.com
Size: 55MB
Password: officialroms
Link:

Click Here To Visit Here

Notice: Tecno Speak KE6 & KE6J Both are Same CPU You can Use Same File But i will Provide Origanl File KE6J But not Teste DA File (If you want to use this file, you will make your own Risk Official ROMs will not be responsible)

How to Install Tecno Speak 6 Air KE6J:

  • The steps below describe how to format one partition of an Tecno Speak 6 Air utilizing SP flash instrument.
  • Extract the content of this SP flash application zip file and Launch SP Display instrument.
  • Choose the scatter file to your device by clicking select besides the scatter-loading record’s dropdown bar.
  • From the windows that look adjacent, navigate to and Pick the Tecno Spark 6 Air KE6J Frp scatter document .
  • You must now be taken back to the SP flash software window, click the Format tab.

Tick the checkbox beside “Manual format flash”.

  • Open windows explorer and Browse to the Place of the Dot file you Picked Before on then open it with Notepad++
  • Scroll down the contents of the Dot file until you Reach the partition you Want to format [in my case, I Am trying to format FRP partition.
  • Then connect to the PC with a USB cord by powering off the phone (with the battery in). You should get a green tick once it’s good.
  • You should boot up theTecno Spark 6 Air KE6J Da & Frp File now.

Disclaimer:

  • Once your computer is detected by the SP flash tool, avoid disconnecting until the task is complete, as this could cause the Tecno Spark 6 Air KE6J Da & Frp File to go dead.
  • If you choose “Autoformat-Format All” accidentally, your system will go dead and you will need to flash Tecno Spark 6 Air KE6J to revive the phone completely.

Readme:

4 COMMENTS

LEAVE A REPLY

Please enter your comment!
Please enter your name here