Here is where you can get the Tecno Spark 4 Air KC6 FRP file. The Tecno FRP Unlock File is the original file that is included in the scatter file, which explains how to flash and install drivers using the SP Flash tool. Here’s how to use a Scatter file to Phone Unlock and FRP Bypass a Tecno Phone, which is detailed below. Manual on how to flash.
Table of Contents
About Tecno Spark 4 Air KC6
The phone has a 5.50-inch touchscreen display with 720×1280 pixel resolution. A 1.5GHz quad-core MediaTek MT6737T processor powers the Tecno i5. It has a total of 2GB of RAM. The Tecno i5 is powered by a 4000mAh non-removable battery and runs Android 7.0.
Download Tecno Spark 4 Air KC6 FRP File & Unlock Tested
How to Unlock Tecno Spark 4 Air KC6 FRP File:
- Download all of the Documents in the above links if the link is not Functioning.
- Only leave your comment on below comment box
- Install WinRAR software on your Pc or laptop to Get extract downloaded Hyperlinks
- Extract all Document and Then paste into desktop
- Switch OFF Phone Press and Maintain Volume Up + Down and Add USB Cable
- Wait Until Improving
- When Done Disable Protection, You can Watch like Below Picture
- Open SP flash Instrument Click Scatter-loading Select button and Choose Scatter_Android_scatter Document
- Click Download-Agent and Select MTK_AllInOne_DA.
- Go to Option ► Connection and Set Com Port (COM:3) and Baud Rate (921600)
- Now Open Device Manager and Check Your Phone Com Port (Check below Image for more Information)
- Now go to Userdata Format Tab and click to Manual flash
- Copy 0xea000000 code and paste to Begin Address[HEX]
- Copy 0x2b8d80000 code and paste to Format Length[HEX]
- FRP Unlock Code Manual Format Flash.
- Copy 0x4fa0000 code and paste to Begin Address[HEX]
- Copy 0x100000 code and paste to Format Length[HEX]
- Click on the Start button