Redmi Y1 FRP Unlock (Google Account Bypass) phones are difficult to flash; you must be familiar with the process. It makes no difference whether your phone is dead or working when using this method of flashing.
To flash the Redmi Y1 with Mi Account Locked, first charge the phone to at least 50% capacity, and make sure you have the original data cable that came with the phone. You’ll need these files for flashing, so first download them.
After downloading all this file ,first install the mi pc suite then install RB Soft Tool and after that unzip the redmi 4’s file and store all this on desktop.
This is the very easy method of flashing redmi 4 with locked bootloader by xiaomi flashing cable, this is a special cable which only used for Without flashing redmi phones, basically this cable helps to directly enter the phone in EDL mode.
Not Signed In (Google account Bypass):-
Table of Contents
Now the Unlocking process is going to start
- so first turn on the computer with disable driver signature enforcement
- then turn off the phone and connect the phone to the pc with holding the button of the xiaomi flashing cable and the phone will enter in EDL mode
- In EDL mode phone will go blank with red blink over the top , it means the phone is on edl mode.
- Now run the RBSOFT Tool Without Box and first click on refresh and there will be seen a connection of phone ex:(com10 or com12 or com14)
Download RBSoft Tool V1.6 Free
File Size: 8.67 MB
Password:-officialroms
Redmi Y1 Frp Unlock Remove File Download
File Size: 223 KB
Password:- officialroms
- The flashing process will taken approx 30 secand so dont be panic and dont remove the cable until there success screen poped up. And the first boot up of the phone will takes arround 60 secand Remove Mi account Working 100% 2018
Redmi Y1 Frp Unlock (Google Account Bypass) Remove Without Box In Hindi
Readme also