Realme C20 RMX3202 Unlock File & Frp File: You can unlock Realme C20 using simple forgotten patterns, PIN, password or Google account login method. This is an easy-to-use method that works if you remember your login information for your Google account so that you can use your locked device again. To remove the C20 Pattern Lock PIN and password, follow the steps below. Don’t worry, we can unlock and bypass the password / PIN protection of Forget Screen Lock on Realme C20 with a registered Google account. The previous Google account is very important as it is used to make the phone work without forcing a hard reset to the master format (factory default).
Table of Contents
About Realme C20
Realme C20 smartphone was launched on January 22, 2021. The smartphone is powered by an octa-core MediaTek Helio G35 processor. It features a 6.50-inch touchscreen display with a resolution of 720×1600 pixels, a density of 270 pixels per inch (ppi) and a 20: 9 aspect ratio. It runs on Android 10 and runs on a 5,000 mAh battery
Download Realme C20 RMX3202 Unlock File & Frp File, Full Reset Using SP Flash Tool
|Realme C20 RMX3202 by officialroms.zip||MediaFire / Degoo Server|
|SP Flash Tool V5.1804 by officialroms||Click Here|
|Very Important Driver||IibUBS Driver / MTK Driver|
|Mediatek Auth Bypass Tool V4||Click Here|
How to Unlock Realme pattern C20 RMX3202 :
- First Download All File & Install All Driver That is Very Important
- Install WinRAR software on your Pc or laptop to Get extract downloaded Hyperlinks
- Extract all Document and Then paste into desktop
- Initial Install libusb win32 devel filter 184.108.40.206 OR MediaTek USB Notebook and after that Reboot (Restart) Computer
- Open MCT MediaTek USB Driver Tool Click BYPASS
- Switch OFF Phone Press and Maintain Volume Up + Down and Add USB Cable
- Wait Until Improving
- When Done Disable Protection, You can Watch like Below Picture
- Open SP flash Instrument Click Scatter-loading Select button and Choose MT6765_Android_scatter Document
- Click Download-Agent and Select MTK_AllInOne_DA.
- Go to Option ► Connection and Set Com Port (COM:3) and Baud Rate (921600)
- Now Open Device Manager and Check Your Phone Com Port (Check below Image for more Information)
- Now go to Userdata Format Tab and click to Manual flash
- Copy 0x22c000000 code and paste to Begin Address[HEX]
- Copy 0x300000000 code and paste to Format Length[HEX]
Now Go to The Emargency Dial & Dial *#813# .Now Your FRP Remove One Step.
- Click on the Start button
- Wait Until Completed.