Jio F221s Flash File: Download Lyf Jio F221s Flash File Tested 2021 (Hang On Logo). LYF Jio F221s Flash File (Firmware ROM) Full Tested, firmware flash tool is here. Today we are going to share a full detail post to flash official stock ROM on Jio F221s mobile. Jio F221s was launched in 2019 but till now it’s most selling low budget keypad mobile for Jio users.

Lyf Jio F221s Flash File

Lyf Jio F221s Flash File Tested (Stock ROM)

But problem is that there are so many software related issues on the device like Jio F221s FlashFile stuck on Jio Logo, stuck in a boot loop, hanging issues, null IMEI problem and auto reboots issues, etc. So if you are one of them who are using Jio F221s mobile and getting any software related problem on the device then this post may help you to get a ride of these problems.

The best part of this tutorial is that no technical skill required to perform this task. Same as no need to go anywhere to repair your device. Everyone can do it in their own home. Here in this Jio F221s Firmware flashing guide, we will show you two different methods to flash Jio F221s FlashFile mobile. You may use any method to install official stock ROM on the Jio flash file.

Password: officialroms
Keep Supporting Youtube Channel: Click Here

NameDownload
LYF-F221S-000-02-30-311019Download Now
Spreadtrum spd 6810 8810 android usb driverClick Here
Lyf Jio F221S Flash toolClick Here

How to Flash Lyf Jio F221s Flash File:

  • Download the LYF F221s Flash file which consists of File, Tool & Driver.
  • Install Driver
  • Boot Key  *
  • Connect Phone in off mode holding Center Key to cross-check driver installation. It will make port named “Qualcomm HS-USB 9008”
  • It means the driver has been installed successfully.
  • Install Flash Tool named Megafone SW Download Tool.
  • Click on Search File & assign the path of the flash file.
  • Out of four File appearing, select prog_emmc_firehose_lite.
  • Connect Phone & press Center Key as Boot key & Click on Download.
  • The phone will switch to EDL mode directly and Upgrade starts.
  • Make sure no space is there in File Path.

If flashing fails or does not start, then there must be a gap between the words while choosing the flash file. Rename the folder. As in Qualcomm Flashing, there must be no gap in between the words. JIO new should be replaced by jio_new or joined.

Read Also:

LEAVE A REPLY

Please enter your comment!
Please enter your name here