Here you can find all the new Lava firmware for Lava Z50 Flash File. If you are searching for Lava Z50 stock ROM firmware, then you are on the right spot. Make sure your device is Lava Z50, if it is not, before installing, then flashing the stock firmware below will brick your device.
The firmware ofLava Z50 Flash File, helps unbricking the system, upgrading the device to the latest version of Android, reverting the device back to stock, fixing boot loop issues and many other device problems.
About Lava Z50 Flash File
The Smartphone Lava Z50 was released in February 2018. A 4.50-inch touchscreen display with a resolution of 480×854 pixels comes with the handset. The Lava Z50 is powered by a MediaTek MT6737M quad-core 1.1GHz processor. It’s supplied with 1GB of RAM. The Lava Z50, powered by a 2000mAh battery, runs Android 8.1. The Lava Z50 on the rear packs a 5-megapixel sensor, as far as the sensors are concerned. For selfies, it features a 5-megapixel camera on the front.
Download Lava Z50 Flash File Tested File
|The LAVA_Z50_1_8_V2.0_S159_20181016_ENG_IN_181228||617MB||Download Now|
|The LAVA_Z50_1_8_V2.0_S175_20200302||610MB||Download Now|
|UpgradeAndWriteEfuse Flash Tool||8MB||MediaFire Download|
|All in One MTK Driver||25MB||Click Here|
How to Flash Lava Z50 Flash File:
- MTK Driver installation.
- Download the SP Flash Tool Kit & Extract.
- Double-click Flash tool.exe from the icon that appears,
- Click on Scatter-Loading, which appears on the right side of the tool, to run the tool on your PC.
- Now, allocate the firmware to be in the “Android scatter.txt” format.
- To start flickering, click on Download.
- By pressing the Volume down or Volume up buttons, turn your mobile off and connect it to the PC.
- It will lead you to Flashing Successfully.