Tecno Camon iAir2+ ID3K Flash File, Stock ROM and Frp Unlock File can be used to remove FRP locks from Tecno phones. However, flashing does not always start immediately after loading the record inside the device; usually this indicates a lack of driving force from your PC. With the ID3K Flash File you are ready to begin unlocking your smartphone!
Flash file Tecno ID3 K may be used to unlock FRP. As, flashing will reset the FRP lock directly from the phone. Make sure to use the Tecno flash tool for flashing and if flashing does not start, then check the driver. The only reason if the flashing does not progress after loading a file into the tool is the absence of a driver from the PC.
Tecno Flash Tool v4.1808.28.17_for_AfterSales by officialroms
Password:-officialroms
Password:-GD_Mekail92/Tecno ID3k
Password:-officialroms
How to Flash Tecno ID3K:
- MTK Driver install.
- Download package & Extract Flash tool from Tecno.
- Double-click on SWD AfterSales from the icon appearing.
- Start the tool on your PC, Click Set & Select Flash File under Load.
- Click Confirm button then click Start button.
- Turn off your mobile device and connect it to your PC by pressing Volume down or Volume up key.
- It will bring you to Flashing Successfully.
Readme Once:
Take a Backup: Before flashing the above Firmware on your Tecno ID3 K device, be sure to make a backup of everything as all personal data will be erased once the stock firmware has been flashed.
This page contains official firmware from the company, providing you with a way to recover your device if it ever experiences boot loops, software errors, update issues, hanging or dead problems.
Read Also:
