Download Infinix X6811 Flash File (official Firmware). The firmware file provided by Infinix was the first file and is contained in the scatter file. It documents how you can flash the device and how to install the driver using SP Flash Tool. Here’s how to flash Infinix Mobile using a scatter file. The file is provided below in detail—the steps to Flash Manual.
Table of Contents
About Zero X Pro X6811
Infinix Zero X Pro smartphone was released on September 13, 2021. The phone has a 6.70-inch touchscreen display with a resolution of 1080×2400 pixels with a solution that is 480 pixels for every centimetre (ppi) and an aspect ratio of 20:9. Infinix Zero X Pro comes with an Octa-core MediaTek Helio G95 processor. It is equipped with eight GB RAM. Infinix Zero X Pro Infinix Zero X Pro runs Android 11 and is powered by a battery that is 5000mAh.
- To downgrade a device
- To upgrade a device
- Repair boot loops and software issues to the device
- Completely Re-Installation of Board Software
Infinix Zero X Pro X6811 Flash File (official Firmware)
Device Name: Zero X Pro
Type: Full ROM
ROM Size: up to 4.23 GB
SoC: Helio G95
Youtube: Click Here
Firmware Version: X6811-H857AC-R-GL-210818V813
What is the best way to Flash Infinix Zero X Pro X6811:
Download MTK Driver.
1. Download the program and extract the SP Flash Tool.
2. Out of the icon that appears, Double click on Flash_tool.exe
3. It will start the program on your computer 3 Click on Scatter-Loading on the right part of the program.
4- Now, assign the firmware, which will be in the form “Android_scatter.txt”.
5- Click Download to begin flashing.
6- Turn off your Mobile and connect it to the PC by pressing Volume down or the Volume up key.
7. It’ll guide you to successful Flashing.