Xiaomi Corporation is a Chinese electronics company headquartered in Beijing. Xiaomi makes and invests in smartphones, mobile apps, laptops, and related consumer electronics.
Xiaomi Redmi Note 6 Pro was launched in October 2018, The phone CPU powered by Octa-core 1.8 GHz Kryo 260, and it comes with 6GB RAM (Snapdragon 636) and 64GB ROM, microSD, up to 256 GB. Xiaomi Redmi Note 6 Pro comes with the Primary 12MP + 5 MP selfie camera and powered by Non-removable Li-Lon 4000mAh battery.
File Size: 1.9 GB
Flash Tool:-Click Here
Flash Mode:- Fastboot & EDL Mode
How to Flash Redmi 6 Pro:
Download Xiaomi Redmi 6 Pro Flash File
1- Connect phone through USB cable to PC and unplug battery.
2- Short Test Point and connect battery.
3- Under Device Manger, port of Qualcomm HS USB QLoader 9008 port will appear.
4- Download & run MI Flash Tool
5- Place the Flash File on Desktop.
6- Assign the Folder path.
7- Click on refresh & then tap Flash button.
Download the MIUI xxx Fastboot ROM for your Xiaomi devices Now turn your device off completely. Press the Volume– key and the Power button simultaneously to enter Fastboot mode. Once you have entered fastboot mode, you will see the Mi Bunny Fastboot mode picture. Now connect the device to the Windows PC/laptop via a micro USB cable. You need to double click on the downloaded ROM file to extract it. Open the extracted ROM folder, and copy its path on the computer. To install Mi Flash Tool, Download Mi Flash Tool Zip and Extract the MIUI MI Flash tool on your computer. Now click on the installer file on your computer and continue the installation. (Ignore the security warning) and select run to continue the installation. After installation is completed, open MiFlash.exe and paste the address bar from the ROM file folder path copied in the 6th step. (You can also browse the folder by tapping the Select button). If you have pasted the Address code, Now Click on the first button (circled out in yellow) to Refresh, and MiFlash should automatically recognize the device. Then click the second button (circled out in red) to flash the ROM file to the device. Your flashing process has started, Now Wait until the progress bar inside MiFlash turns fully green, which means the ROM has been successfully installed. Then your device should automatically boot to the new version.
You have successfully installed the MIUI Stock ROM on Xiaomi device by following the step above.