Download Redmi K30 5G Flash File Stock ROM. The latest version of the Official MIUI 12 Firmware Data for the Redmi K30 5G. This flash file can be found in the MBN File, which describes how to flash and driver install from Mi Flash. Mi Flash tool. This is how you can flash Xiaomi Phone with a flash file. MIUI V12.5.3.0.RGICMXM

Redmi K30 5G Flash File Firmware (Picasso)

If your phone hangs or the logo hangs, then flashing the Mi firmware will resolve any issues with your phone. Make sure you log into your Mi accounts on the phone before flashing. If not, an error could occur while flashing. Flashing only a few models of Xiaomi can remove any Mi account. Also, you can unlock the account by flashing the MI Account to open the file.

Download Redmi K30 5G Flash File

Device Name: V12.5.3.0.RGICMXM
Type: 
Full ROM
Size: 
5.50 GB
SoC:
 Qualcomm CPU
Password: officialroms

V12.5.3.0.RGICMXM China Stable | EDL
V12.5.3.0.RGICMXM China Stable| OTA

Note: You will need Authorized tool to Flash and Remove Mi Account.

Download Link Here

How do I Flash Redmi K30 5G ?

  • Download the Redmi K30 5G Flash File and Install the Driver by clicking on the links above.
  • Download your Xiaomi flash tool. The USB driver for the smartphone is contained in the flash tool.
  • Extract your flash files from the zip.
  • Extract the zip file following the 7zip setup is completed.
  • Install it if the 7zip setup has not been installed on your PC. (7zip Link)
  • Then, run the Xiaomiflash.exe on your Desktop and select flash within it.
  • Once you have done that, select the last option in the tool and select”image” from the “image” folder inside the folder in which your flash files reside.
  • If you’re Flashing using Fastboot mode, choose the “firmware” “firmware” location.
  • After choosing the firmware After that, connect the phone to the computer.
  • To convert the phone to its EDL model, you must locate it and then switch the EDL point.
  • Then attach the data cable to the phone.
  • After that, click “Clean All,” as shown below. Then click the Refresh button, which will reveal the com port on the tool.
  • Then, click on the flash button, and the flash will then begin.

Read Also:

LEAVE A REPLY

Please enter your comment!
Please enter your name here