Hi Firend I will Given Realme Narzo 50i RMX3235 Flash File (Stock Firmware) 2022. But This File Flashing By Online So If You Don’t Now How To Flash I Will Only Guide Provided in This Site. I am No User id Or Password Msm Download Tool So You Connect any Online Services User to Flash Online Using Teamviewer. Thank You Realme Narzo 50i RMX3235 Flash File can be used to repair logo hang and delete all locks on the screen. This file will delete all form of screen lock after flash, such as Pattern and frp. Please use the new flash file in the emergency dial to flash Realme narzo 10a inspect system edition by dial code *# 899 #.

Realme Narzo 50i RMX3235 Flash File

Download the file below with a direct download link and read all the flashing instructions before flashing your phone. If you run a flash tool on your PC, you will be asked to log in as the device needs login credentials. If you don’t have to just contact me on the facebook page or give me a letter. It’s operation paid provided.

About Realme Narzo 50i

Realme Narzo 50i mobile was released on September 24, 2021. The phone has a 6.50-inch touchscreen display that has a resolution of 1600×720 pixels. It is equipped with a capacity of 2GB in RAM. The Narzo 50i from Realme is running Android 11 and is powered by a battery that can hold 5000mAh.

Realme Narzo 50i RMX3235 Flash File

Password: officialroms
Working Model:  Realme Narzo 50i
Subscribe You Channel More Update: Click Here
OTA & EDL File

List Narzo 50i Firmware

Name: New_QcomMtk_Driver_Setup_V2.0.1.1.zip
Size: 16MB
Password: officialroms.com
Link: Click Here

How to Flash Realme Narzo 50i

  1. Download the Realme Narzo 50i, RMX3235 Flash File and install Realme USB Driver
  2. Extract files from the zip file
  3. All files will be in the folder.
  4. Click Here To Download MSM Download Tool.
  5. Enter MSM tool’s registered login password
  6. Once the tool has been opened After, click Start Bottom
  7. After that, check the memory of your computer. Checksum
  8. Please switch off the phone to reconnect it to your phone.
  9. The volume buttons must be turned both up and down to link the phone to download mode as well as the Plugin Cable
  10. The flashing will begin and then stop until it’s completed.

Notice: During flashing, charge the phone by 30% before flashing. Do not disconnect your data cables from your phone. Otherwise, the phone will enter dead mode.

Read Also:

LEAVE A REPLY

Please enter your comment!
Please enter your name here