Realme Narzo 10 RMX2020 Flash File (Stock Firmware) 2020

Realme Narzo 10 RMX2020 Flash File (Stock Firmware)  2020

Hi Firend I will Given Realme Narzo 10 RMX2020 Flash File (Stock Firmware) 2020. But This File Flashing By Online So If You Don’t Now How To Flash I Will Only Guide Provided in This Site. I am No User id Or Password Msm Download Tool So You Connect any Online Services User to Flash Online Using Teamviewer. Thank You Realme Narzo 10a RMX2020 Flash File can be used to repair logo hang and delete all locks on the screen. This file will delete all form of screen lock after flash, such as Pattern and frp. Please use the new flash file in the emergency dial to flash Realme narzo 10a inspect system edition by dial code *# 899 #.

Download the file below with a direct download link and read all the flashing instructions before flashing your phone. If you run a flash tool on your PC, you will be asked to log in as the device needs login credentials. If you don’t have to just contact me on the facebook page or give me a letter. It’s operation paid provided.

[content-egg module=Flipkart template=grid]

Download Realme Narzo 10 RMX2020 Flash File (Stock ROM)

Name: RMX2020_11_A.21_200410_7419c884.zip
Size: 11.40 GB
Link:

Click Here To Start Download

Important Realme Qualcomm Driver Download

Name: New_QcomMtk_Driver_Setup_V2.0.1.1.zip
Size: 16MB
Password: officialroms.com
Link: 

Click Here To Start Download

How to Flash Realme Narzo 10 RMX2020:

  • First Download Qualcomm Driver & Flash File.
  • Than Extract All Fir USing 7zip or Winrar Software You can Eassy Extract The File He is take 20 Minutes to Extract The File.
  • After Completed The Working Download Teamviewer Desktop Sharing Software.
  • Now Agent Will Control You Pc And Open MSM Download Tool
  • After Open Msm Tool Asking Userid Or Password To Authorized To Access The Tool.
  • After Enter Userid or Password Your account is Login.
  • Now Select The Firmware File Realme Narzo 10 & Verify The Code.
  • Press Volume Up & Down Button Boot In Qualcomm Mode EDL Port.
  • After Completed You Verfiy The Code Now Flash You Mobile In Edl Mode
  • After Flashing Done
  • Now Mobile Booting Time 5 to 10 Minutes Boot Your Mobile.
  • Done.

Note: If You Drive is Not Connected Make Share this is A Driver Issue Watch This Video To Fixed You Problem. Driver Error Fixed

Read Me:

LEAVE A REPLY

Please enter your comment!
Please enter your name here