Modern Android smartphones include a data protection feature called Pattern Lock (Screen Lock), which safeguards phones against unwanted access. Unfortunately, if you forget the Pattern, Password or Pin lock for your Realme phone, Factory Resetting it won’t work. In the following topics I’ll show you how to obtain Realme 6i RMX2040 Pattern Unlock File & FRP File (Remove Screen Lock) Without AUTH – SP Flash Tool Free by following the steps below carefully.
Realme 6i RMX2040 Pattern Pin Frp Unlock File 2024
Screen lock is an essential security measure for Android phones that can be enabled in the Security & Lock Screen menu. Pattern, Password, Pin are just some of the options available; Android has since enhanced this security by including Fingerprint and Face Lock options as well. Once activated on your phone, you’ll need to enter or draw either your Password, Pattern, Pin lock, or Fingerprint again in order to gain access.
|Realme RMX2040 Pattern Pin Frp Unlock File
|SP Flash Tool
|Very Important Driver
|IibUBS Driver / MTK Driver
|Mediatek Auth Bypass Tool V4
How to Unlock Realme 6i RMX2040 :
- First Download All File & Install All Driver That is Very Important
- Install WinRAR software on your Pc or laptop to Get extract downloaded Hyperlinks
- Extract all Document and Then paste into desktop
- Initial Install libusb win32 devel filter 220.127.116.11 OR MediaTek USB Notebook and after that Reboot (Restart) Computer
- Open MCT MediaTek USB Driver Tool Click BYPASS
- Switch OFF Phone Press and Maintain Volume Up + Down and Add USB Cable
- Wait Until Improving
- When Done Disable Protection, You can Watch like Below Picture
- Open SP flash Instrument Click Scatter-loading Select button and Choose MT6768_Android_scatter Document
- Click Download-Agent and Select MTK_AllInOne_DA.
- Go to Option ► Connection and Set Com Port (COM:3) and Baud Rate (921600)
- Now Open Device Manager and Check Your Phone Com Port (Check below Image for more Information)
- Now go to Userdata Format Tab and click to Manual flash
- Copy 0x21e800000 code and paste to Begin Address[HEX]
- Copy 0x300000000 code and paste to Format Length[HEX]
Now Go to The Emargency Dial & Dial *#813# .Now Your FRP Remove One Step.
- Click on the Start button
- Wait Until Completed.