Official Stock Flash Firmware Now Available for the Asus ROG Phone 5s Flash File. This firmware can be used to solve any software issues in your Asus ROG Phone 5s, such as hang-on logo, fastboot Mode, and FRP lock. It also allows you to display blank or white after flashing, uneventful recovery, dead after Flash, etc.
Asus ROG Phone 5s Run on Android 11, and QCOM SD888+ Processor powers it. A dual SIM smartphone supports a Nano SIM card; connectivity features Include hotspot, GPS, WIFI, Bluetooth 3G & 4G. The device comes with 8/12GB of RAM and 128/256GB of storage that can be expandable via an SD card.
Download Asus ROG Phone 5s Flash File (official Firmware)
Device Name: Asus ROG Phone 5s
Type: Full ROM
ROM Size: up to 6.8GB
SoC: QCOM SD888+
OS: Android 11
Firmware version: Android 11_Factory_ROM
Subscribe You Channel More Update: Click Here
| Asus_Rog_Phone_5s_ZS676KS_QFIL_FUSE_AND_LOCK_UFS_Factory |
| WW-18.0840.2111.200 |
| QPST Tool & Fastboot Mode |
| Qualcomm Driver |
How to Use QPST Tool (Asus ROG Iphone 5s):
- Download ROM & Unzip Stock. Check that file extension is either in the format of.mbn or content.xml.
- If so, download Qfil’s Tool & Install.
- Then click Programmer Path to select Flat Build and select Program file with the.mbn extension.
- Click on the file Load XML & choose Raw Program. After Raw Program selection, you must select Patch File.
- Connect Phone Holding Boot key The section “No Port Available” at the top of the tool display will show Qualcomm USB port.
- Click on Download to start Flashing.
Flash Contents.XML File:
- Select Meta Build & Click Programmer’s path and select the extension file.mbn.
- Click Load Content & Select File.xml.
- Connect Phone Holding Boot key The section “No Port Available” at the top of the tool display will show Qualcomm USB port.
- Click on Download Content.xml to start Flashing.
Read Also:
