Prince PC2 Plus Firmware File (Stock ROM) CPU MT6580

Prince PC2 Plus Firmware File (Stock ROM) CPU MT6580

Prince PC2 Plus Firmware File (Stock ROM) CPU MT6580

if you are facing Prince PC2 Plus Firmware File (Stock ROM) CPU MT6580. Then you can install ROM at home without any help of a software technician. in fact not all of the issues that are the hardware fault.

Today we will discuss how to sort out Prince PC2 Plus Stock Rom issue. There are several methods to Flash Prince PC2 Plus Firmware File (Stock ROM) CPU MT6580. Of course, there are also some custom mods and ROMs that you can try.

However, if you do not like the custom ROMs you have installed and want to go back to the original operating system, we have the guide for you.

If you are looking for this guide, we will now see how you can flash the  Prince PC2 Plus Firmware File (Stock ROM).

We are going to Flash Stock ROM on Prince PC2 Plus. In this guide, we have used the SP Flash Tool to flash the  Prince PC2 Plus Firmware File (Stock ROM) .

And we include the Official link to Download  Prince PC2 Plus Firmware File (Stock ROM)  and all Needed Files. your device may get bricked And flashing stock ROM is the only way to go out.

To perform this advance process of Flashing stock ROM please Go Step by step. If you got any error then leave a Comment.

We use the Sp flash tool for this procedure there are different reasons why we will use Sp Flash Tool to unbrick the Prince PC2 Plus. I believe this tool is very efficient.

Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Prince PC2 Plus.

The Advantages Of Prince PC2 Plus Stock

A Soft Brick or a Software Brick, is usually just when you’re Prince PC2 Plus is stuck in a boot loop, and as the name implies, is caused by a software error on Prince PC2 Plus.

Usually the lack of a system to boot from or some other minor software bug that glitching boot.

They are easily fixable by flashing the stock ROM on Prince PC2 Plus through recovery or with SP Flash Tool.

If your Prince PC2 Plus device turns to a soft-brick, it may:

  • Keeps Rebooting;
  • Boots Straight Into Recovery;
  • Boots Straight Into its Bootloader;
  • Freeze at the startup screen or boot Animation;

Prince PC2 Plus Firmware File (Stock ROM)

Name: Prince_PC-2_5.1_ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2.rar
Size: 413 MB
Processor: MediaTek MT6580
Link:

Click Here To Start Download

Name: Miracle Driver by Officialroms.com.zip
Size: 93 MB
Password: officialroms
Link:

Click Here To Start Download

Name: SP_Flash_Tool_v5.1804.Zip
Size: 37 MB
Password: officialroms
Install Password: officialroms
Link:

Click Here To Start Download

Disclaimer:

  • Please Read and understand the Full Guide Before Flashing Prince PC2 Plus Firmware File (Stock ROM).
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM Prince PC2 Plus must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Prince PC2 Plus Firmware:

1. Download Prince PC2 Plus Firmware File (Stock ROM) zip file given above and extract it in your computer.

2. Download Prince PC2 Plus USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.

3. Next, switch off your Prince PC2 Plus smartphone and take away the battery (it’s removable).

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover “Flash_tool.exe” file in it. Launch it.

5. As soon as SP Flash tool is launched, click on on “Download” tab.

6. Now, click on on “Scatter-loading” button within the download tab.

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

8. Now click on on the “Download” button to start out the flashing process.

9. Next, join your Prince PC2 Plus Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two. As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

11. Now, shut SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed Prince PC2 Plus stock ROM on your  Android device. If you happen to encounter any points whereas following this tutorial, do let me know by way of feedback.

LEAVE A REPLY

Please enter your comment!
Please enter your name here