Here is the method Remove Honor 9 Lite Screen Lock & Frp Unlock Android 9.1 EMUI 10 Without Any Box 2020 New Security Patch Method By MRT Dongle Software, this is very good software to remove password, and Bypass FRP Bypass from your android devices, you only need to download and install this software in your computer, and after that connect device to the computer and then just Remove Password, and Bypass Google Account easily Honor9N Pattern Unlock, PassCode Remove Without Any Box 2020.
This model Was Not Supported After Ota Update Honor 9 Lite Screen Lock & Frp Unlock Android 9.0 Without Any Box 2020 With Mrt Tool 3.19 We Found New Method For Unlock By Too Short Method Tested By Team.
Table of Contents
How To Remove Honor 9 Lite Screen Lock & Frp Unlock EMUI 10?
Disassemble Phone Open Screen Warranty May Be Void Open Sticker Foil Protected On Cpu And Ram Find Resistor According to Photo Short It With Gnd Connect Cable And Wait for Qualcomm Port Appear Start Operation Battery Connected Need.
Concept Behind MRT Dongle:
As we all know MRT Dongle is one of the best mobile flashing tools. Users can use this amazing tool to perform many tasks [Mobile Related] Honor 9 Lite Screen Lock & Frp Unlock.
But the main problem is that most of the latest Oppo phones come with a pre-locked bootloader. So it’s really hard to bypass Pattern or reset User lock Honor9N Screen Lock & Frp Unlock if the bootloader is locked. On that condition, you have to boot the Oppo locked device into TP mode or emergency downloading mode.
Honor 9 Lite Screen Lock & Frp Unlock Without Any Box
Notice: Watch This Video Very Important. Click Here
How to Unlock Honor 9 Lite Screen Lock PassCode Remove using Mrt 3.19
Once the device booted into Volume Up & Down Button Press Same Time, use MRT Without Dongle to remove User Lock.
- Download MRT Dongle Unlock Tool from here.
- Extract the downloaded QC Unlock Tool and run as administrator.
- Wait to launch
- QC Unlock Special Tool properly.
- Honor 9 Lite Test EDL Point Than Connect.
- Click on the “Start Button” option from below.
- Select Brand Huawei Open Both Tool Hw Flash & Hw Tool Using Debugging Method.
- Now First Open MRT HwFlasher.
- Select USB COM 1.0.
- Than Select CPU Type hisi_659
- Port Auto.
- Press Start Button.
- After You, Mobile is Enable ADB.
- Now Select Unlock Account.
- Clear FRP.
- Press Start Button.