Itel A22 Pro IMEI : The Itel A22 Pro is a low-ranged budget device. It offers some pretty good features for a low price. The battery gives runs the device for a long hour with heavy functioning. The display is perhaps small for the user’s standards. The user can store a lot on the device given a great internal storage and also a great external storage. The cameras on the device lack quality. The configuration on the device is not too worthy and dependable for high-end tasks. However, the price of the device is a great motivator for the buyers.
Table of Contents
Download Qualcomm imei tool (Fixed Baseband ISSUE)
How To Use Qualcomm imei tool Repair Tool To Write IMEI
As we already told you, the QLM IMEI Repair Tool is a Qualcomm IMEI tool repair tool for all Qualcomm CPU or chip-based smartphones, including keypad mobiles. The user can use the QLM IMEI repair tool to flash any single SIM IMEI or dual SIM IMEI number.
So make sure, you are going to flash IMEI on qualcomm device only. Otherwise, tool will not work for you.
We already tested this Qualcomm IMEI repair tool [Qualcomm imei tool Repair Tool ] on keypad mobile [ Jio F90m & Jio LF 2403n & A22 Pro ] and android [ Redmi 4 Santoni ] Smartphone.
Instructions To Flash IMEI On Qualcomm Phone Using QLM IMEI Repair Tool
- First off download and install “Qualcomm USB drivers” on windows pc. Drivers installation is must to create bridge connection in between pc and mobile. Skip the step, if drivers are already installed. No need to install it again in that case. If not, follow the below link to install Qualcomm USB drivers in pc.
- Extract the downloaded “Qualcomm imei tool Zip file” on pc.
- Important Step : Enable DIAG mode in device.
Please Note: DIAG mode must be enable in Qualcomm phones to flash IMEI number using IMEI tool. Same as, DIAG port enabling methods can be different for different devices. Do google to find the correct method to enable DIAG mode for your device or read the below post to learn different methods to enable DIAG mode.
- Connect the device with pc after enabling DIAG mode properly. If the DIAG mode enabled, it will show “Qualcomm HS-USB Diagnostic 9091 port” under the “device manger” section.
- Now open the “QLM IMEI Tool” on pc. Here it will detect the COM Port automatically as shown in below screenshot.
- Type IMEI1 And IMEI2 and then hit on “Write IMEI” Button from the tool.
Important : In case you have single SIM mobile then type the same IMEI number in both IMEI1 & IMEI2 section.
- At the end of successful IMEI flashing, it will show green “DONE” message.
- Unplug the device from pc and reboot it for once. [ Reboot Is Must ]
- Dial *#06# and confirm the IMEI status of the device.
- DONE!!! IMEI flashed in your device using QLM IMEI tool