Lenovo Vibe p1ma40 flash file tested (Stock ROM)

Lenovo Vibe p1ma40 flash file tested (Stock ROM)

Lenovo Vibe p1ma40 flash file tested (Stock ROM) Full Checked 100 percent risk-free job. Follow the instructions to learn how to access Llenovo p1ma40 flash file from the page below, after downloading the file. Want to brick up your computer or load fresh Lenovo Vibe p1ma40 Stock ROM? You are in the right position then. Here we’ll direct the installation and update of the Lenovo Vibe p1ma40 flash file Stock firmware. MTK Processor powered the Unit.

About Lenovo Vibe p1ma40

In September 2015, Lenovo Groove P1 m smartphone was released. The handset comes with a 5.00-inch touch-screen display with 720×1280 pixel resolution at a pixel density of 293 pixels per inch ( ppi). The Lenovo Vibe P1 m is powered by a MediaTek MT6735 processor with a 1GHz quad-core. It features 2 GB of RAM. The Lenovo Vibe P1 m is running Android 5.0 and is powered by a non-removable 3900mAh battery.

Fixing the stutter or lag on Lenovo Vibe p1ma40 , You can solve software problems by clicking on Stock ROM., Return to stock to gain warranty. Flash Stock To Unburn Lenovo Vibe p1ma40, Fire Stock ROM to fix issue of boot loop, Upgrade and Downgrade Lenovo Vibe p1ma40, Unroot or Fix Bugs on your phone

Download Lenovo Vibe p1ma40 flash file tested (Stock ROM)

NameSizeTested Or NotDownload Link
Lenovo_P1ma40_S040_MT6735_20170106.zip1.40GBNot TestedMediaFire
Lenovo_P1ma40_S036_MT6735_20160822.zip1.40GBNot TestedMediaFire
Lenovo_P1ma40_S033_MT6735_20160808.zip1.40GBNot TestedMediaFire
Lenovo_Vibe_BL234_P1MA40_MT6735.zip1.41GBTestedMediaFire
SP Flash Tool34MBTestedSP Tool
MTK Driver (All in One Driver)12MBTestedMTK Driver

How to Use Flash Lenovo Vibe p1ma40 Flash File Tested Firmware:

  • First Install driver on your PC & Laptops and Enable Developer Mode and USB Debugging on your Phone by this guide. After then cut your phone.
  • Extract Lenovo Vibe p1ma40 Flash File and SP Flash Tool folder, where you would like to save lots of. Open the Smart phone FlashTool and run Sp tool.exe as Administrator.
  • Click on the Scatter-Loading option. SP Flash Tool asks you the situation of the scatter enters your PC. you’ll find it within the extracted Stock ROM folder. First Move To The folder and choose the file “Android_scatter_emmc.txt” which is your stock ROM scatter files.
  • Now Select firmware upgrade from the menu then click on Download. And Connect your cut phone with The PC via USB cable (Make sure your phone is switched off).
  • SP Flash Tool auto-detect your phones and the process will start. If the SpFlashtool isn’t recognized or detects your phone then install VCOM driver. After install the Vcom driver reconnects your transitioned phone with the PC. If you phone again not recognized by your SP Flash Tool then attempt to flash,via the Meta mode flashing process, here is Meta-Mode flashing guide.

Note: Please Make Share If You want to Flash it The Device is Corrupts. Make sure no power interruption takes place.

First downloading Stock ROM on your phone by flashing. After the processes completes, a green ring will appears. Now disconnect your updated Smartphone.

Read Also:

LEAVE A REPLY

Please enter your comment!
Please enter your name here