Flash/Unbrick Redmi 4/4x |Flash Qualcomm Miui Rom Redmi 4/4x Developers have been confirmed to have deleted the Download Mode (EDL) beyond MIUI V8.1, please try it at your own risk. Steps for Redmi 4/4X Flashing / Unbrick: (Can be used to flash from Regional Rom, or Tampered Rom to Original Rome)

Please note that I will not assume any liability for anything that happened to your device. Using Windows 64-bit, 32-bit Windows users have issues. This error may face “Not enough storage to process this command”

Important:-It ‘s recommended that you take data backup before flashing and make sure your phone battery is charged enough. In download mode, you need to start your phone.(Not Fastboot mode)

  • Go to the EDL by a short point.
  • Click Download from Screen
  • Plug USB Cable to PC
  • PC will install the device driver, let it do its job
  • On your PC do these next steps:
  • Open Device Manager and Phone will be detected as QHUSB_BULK under the Com Ports section.
  • Right, Click, and choose Update Drivers.
Remark: Driver Signature Enforcement: Disabling is advised. Reboot your PC in Advanced Mode, and pick Signature Disable Driver.

Follow this thread (Credits to @feds64) Disable Windows 7/8/10 64-Bit Driver Signature Enforcement

  • Choose Browse My Computer for Driver Software
  • Choose the Path of Xiaomi Folder. Most the users will find it like this.
    Note:- If Folder does not exist, Install MI Flash (Link below) first.
  • Win 64 bit C: \ Program Files (x86) \ Xiaomi \ MiPhone \ Qualcomm \ Driver
  • Win 32 bit C: \ Program Files \ Xiaomi \ MIPhone \ Qualcomm \ Driver
  • Choose Install this Driver Software anyway.
  • Wait till the driver installation is successful.
  • The driver will be installed successfully and you can see added in Ports as Qualcomm HS-USB.

Now we are ready to Flash!

Recommended as users experience problems on 32-bit and brick thier devices Flickering ROM Part. Windows 64-Bit.

The ties below for ROM are from Fastboot Mode. Recovery ROM will not work. No need to download again if you have already downloaded Fastboot ROM.

(Recovery ROM file extension with. Zip file, Fastboot ROM file with.tgz or .tar file)

You can select a Fastboot rom here:-

Name: V8.5.2.0.MAMMIED/santoni_global_images_V8.5.2.0.zip
Size: 1.58 GB


Click Here To Start Download

MI Flash Tool Latest Version Free Download

Name: Mi Flash Tool by officialroms.zip
Size: 34 GB

Click Here To Start Download

Important: – Before flashing it is advised to take the backup of data and make sure that your phone battery is charged enough.
Steps to Flash ROM: –
1. Download ROM from the above link (Which one you want to Flash) and extract it to Desktop(Use Winrar Software to extract).
(Please check if the file suffix is ‘.tgz’. Please rename it to ‘.tgz’ if the suffix is ‘.gz or .tar’)
Note: – Some users get an error while extracting on Desktop Because there is space in the username of PC or the folder as shown.
The users should put the ROM In C Drive in a folder without spaces. E,g C:/ROM/MIUI
2. Download the flashing tool from the above link and install it.
3. Once the installation is complete, Run MiFlash application
4. Click on browse
5. Select ROM folder from Desktop(From the location where ROM is saved)
Note: -The path of the ROM folder Should be like “C:\\MIUI” Not “C:\MIUI\images”
The MIUI Rom folder should Contain the following files
6. Press the Refresh button to see your device in flashing tool.
After pressing the refresh button you will see the connected device (COM 5) in my PC

Choose the Flash_all option.
8. Click on Flash and it will start the process
9. Once the flashing process completes
Remove the cable and keep Power Button pressed until it Vibrates.
The Device will start, wait till completion, it can take up to 10 Minutes.


Read Also:


Please enter your comment!
Please enter your name here